TMP Gen5 3.0 Short Ram Intake

Description

The TMP Manufacturing Gen5 3.0 Short Ram Intake has proven performance for your high HP needs.  Unlike the factory provided silicone intake, our design creates an intake with minimal turbulence from air filter to throttle body for more efficient airflow.

• Direct replacement for Whipple supplied intake
• Intake Fits 150mm and 132mm Throttle Bodies
• Light weight design comes in at 1.5lbs compared to the kit supplied intake at 2.9lbs
• Testing showed peak gain of 9.5%hp, 4.2% average across entire rpm range
• Built in IAC bung to eliminate having to use a 90° barb
• Can be ordered without a MAF bung provision for cars with stand-alone ECUs not using a MAF sensor

Included in purchase:

• TMP Manufacturing Gen5 3.0 Short Ram Intake
• Custom Silicone Coupler
• Worm-gear clamp x 2
• MAF sensor bolts x2 (if ordered with MAF sensor provision)
• 6pin MAF connector (if added to order)

***MAF bung provision is for 05+ slot style MAF sensor (NOTE: THIS IS NOT A SENSOR, ONLY THE BUNG PROVISION TO MOUNT CUSTOMER PROVIDED SENSOR)

*** This intake does NOT have a IAT sensor provision. This is done to cut down on protrusions within the intake and improve airflow.  Slot MAF sensors measure IAT.  You can de-pin your factory MAF/IAT connectors and re-pin them into a 6pin MAF connector.  You may add a 6pin connector to your order for $15.

*** Test car is a 2003 Cobra – stock motor with a Whipple Gen5 3.0 (23psi), head studs, Todd Warren Cams, and supporting fuel (NO TUNE CHANGE)

IAT into MAF Conversion Instructions

PROUDLY MANUFACTURED IN THE USA!