Compatibility:

Features:

Fully Plug and Play Installation: No wiring required for basic functionality
- Average Install Time: Under 1 hour!
Pre-loaded Base Map: Helps your engine start on the first turn of the key
Real-Time Tuning & Data Logging: Connect via laptop
8 GB Internal Data Logging: Includes built-in SD card
Supports Aftermarket Wideband Sensors/Controllers
Factory Dash Cluster Control

16×16 Fuel and Ignition Tables: High-resolution tuning for precise control over fuel and ignition mapping
Multiple Acceleration Enrichment Strategies: Optimizes fuel and timing for acceleration
Closed Loop Idle Speed Control: Keeps idle stable in varying conditions
Air Conditioner Control: Manages AC load based on engine performance
8 Sequential Fuel Injector Channels: With individual trim tables for each injector channel
8 Sequential Ignition Channels: With individual trim tables for precise ignition control
Onboard High Impedance Injector Drivers: Drives modern injectors efficiently
Allows Removal of Stock Airflow Meter: Offers more flexibility in tuning

12×12 Air-Fuel Ratio Target Tables: For precise tuning with wideband O2 sensors
Multiple Traction Control Strategies: Just add a front wheel VSS
Built-in 3-Step Rev Limiter/Launch Control: Includes flat shift and burnout limiter
Time-Based Timing/Boost Increase After Launch
Real-Time Barometric Correction
Internal 4-Bar MAP Sensor: Reads up to 44 PSI of boost
Configurable Engine Safeties, Warning Lights & Overboost Protection
Closed Loop Boost Control: Requires EBC solenoid kit
CO2-Based Boost Control
Set Boost by RPM, Throttle, Ground Speed, or Gear
Nitrous Control Strategies: Supports wet or dry systems with two channels for configurable staged or progressive control
Rally Style Anti-Lag
Water Injection Control: On/Off or variable
Knock Sensor Input: With adjustable sensitivity and crank angle windowing
Table Switching Input: Change fuel and spark maps on the fly for different fuels, nitrous activation, etc.
Flex Fuel Sensor Input: Switch between E85 and gasoline on the fly
Supports Many Aftermarket Dashes/Displays: Compatible with Racepak, AiM Sports, Race Technologies, AEM, Dakota Digital, and more
CANBus Connector: Allows interconnection with other MegaSquirt-compatible devices for additional functions (EGT input, additional sensors, etc.)